工程记录，
持续上传。ENGINEERING LOGS,
CONTINUOUSLY UPLOADED.
搜索并读取连接器设计、应力分析、模流与量化策略记录。
Search and read records on connector design, structural analysis, mold flow, and quantitative strategy.
连接器技术情报周报：2026-06-18Connector Technology Intelligence Weekly Report: 2026-06-18
本周聚焦高速连接器与 SI、连接器接触力学与 CAE、注塑材料和可靠性，精选 5 项公开论文资料。This week focuses on high-speed connectors and signal integrity, connector contact mechanics and CAE, molding materials, and reliability, with five selected public-paper records.
当AI开始继承量化研究遗产：我的多模型协作量化实验When AI Inherits a Quantitative Research Legacy: A Multi-Model Collaboration Experiment
让 CODEX、Gemini 与 DeepSeek 共同继承、质疑和验证过去积累的量化策略遗产。An experiment in using CODEX, Gemini, and DeepSeek to inherit, challenge, and validate a legacy of quantitative strategies.
从基层到核心：我在连接器产品设计领域7年的成长From the Shop Floor to the Core: Seven Years in Connector Product Design
从冲压车间到主导 PCIe 4.0 量产导入：一名连接器产品工程师七年的能力重构。From the stamping floor to leading PCIe 4.0 mass-production launches: seven years of rebuilding an engineer's capabilities.
Abaqus应力分析总结：最近做的一些 DDR、PCIe 正向力分析Abaqus Normal Force Analysis: Lessons from DDR and PCIe Terminals
以 DDR、PCIe 端子为对象，理解正向力、应力、变形与回弹之间的工程平衡。Engineering the balance among normal force, stress, deformation, and springback in DDR and PCIe terminals.
Abaqus插拔力分析小结Abaqus Insertion and Extraction Force Analysis: Practical Notes
从接触、摩擦、倒角、网格和收敛出发，复盘 Abaqus 插拔力分析的关键变量。A practical review of contact, friction, chamfers, meshing, and convergence in Abaqus insertion-force analysis.
模流分析小结：最近做了几十个项目后的一些体会Mold-Flow Analysis: Lessons from Dozens of Projects
几十个项目之后，对填充、缝合线、包封和翘曲风险的工程化理解。Engineering lessons on filling, weld lines, air traps, and warpage after dozens of mold-flow studies.
方向、仓位、位置Direction, Entry, and Position Size
把方向、位置与仓位拆成三层决策，让交易系统拥有可控制的长期期望。Separating direction, entry location, and position size into three decisions for controllable long-term expectancy.